Question: How to upgrade my Gateway 500?
Solution: Before the Upgrade read carefully the new User Guide
Click on the link below to download the latest Update Package for
Gateway 500 D2B Mercedes: GW5_D2B_210.ZIP
Gateway 500 MOST: GW5_MOST_215.ZIP
Extract the G5_B_UPD.ROM file from the update package and copy to the root of an USB flash drive, then connect the USB drive to the Gateway 500 while it is powered. If there is an iPod connected to the Gateway you can leave as it is in any playback mode or status, do not need to disconnect or stop playback.
Update procedure will start automatically within few seconds and takes cca. 1.5 minute. Do not disconnect the USB drive within this time.
After a successful update G5_B_UPD.ROM is deleted from the USB drive and GW.EES.BIN file will appear with the new software version. If an iPod is connected during the update the iPod screen will light for the second time when the upgrade is completed and the new firmware version appears on the right upper corner of the screen.
When finished, it is better to restart the Head Unit and the Gateway 500.
For Mercedes and Saab drivers with text capable Head Unit text mode re-configuration is necessary as part of the firmware upgrade. Find guidelines at TEXT configuration knowledge base article.
For more information read Knowledge Base or contact Dension Support at support@dension.com
Please note: Firmware v.1.0X will not be supported in the future!
<< back
|
